A complete wireless video solution for remote locations where only 110/120VAC power is available.
Install the camera in the remote location. Plug in the 12VDC adapter in an indoor or enclosed location. Install the radio at your network's location and you have a 4-mile wireless network camera solution.
The outdoor IP66 enclosure is ready for almost all climates. Complete with a thermostat, a heater for those cold days and nights, and a fan for the hot days and nights. 360° left-to-right, 15° up tilt and 40° down tilt makes this housing very installer-friendly. The camera is an advanced day/night camera with 30fps of streaming real time video over the Internet or locally. Additional features include motion sensor, sharpness control, color control, pan/tilt, audio, MPEG-4, MJPEG, 4x digital zoom, 32 MB RAM, 4 MB flash memory.
Free software allows for viewing of up to 16 cameras.
System requirements: Microsoft Windows XP or 7. Pentium 1GHz with a minimum of 256 MB.
Included in this bundle:
- Day/night IP network camera
- Outdoor IP66 enclosure completely wired for installation
- 10 feet outdoor CAT5E cable (to connect to radio)
- 50 feet of 18/2 wire (to connect to indoor 12VDC power supply)
- Two long-range 5.8 GHz radios
- 12VDC indoor power supply
- 50 feet outdoor CAT5E cable (for view locations radio)
- PoE injectors for the radios
- Mounting hardware for the radios
LoS (Line of Sight): Absolutely no obstructions between these two radios (no trees, terrain, buildings or structures). The two radios in this bundle must physically see each other. To achieve distances stated above you must have unobstructed LoS.
